Buy ⅞ yd (0.9 m) to cut 40 pieces, or use 4 fat quarters.
Buy⅞ yd
Strips to cut5
Pieces40
Or fat quarters4
Strip plan
40 × 5" × 5"
Cut 5 strips 5" wide, 8 pieces per strip
Fabric length
25", cut from 40" of usable width
Buy
⅞ yd(0.9 m), includes 10% extra
Or fat quarters
4 fat quarters
Cutting layout
Each band is one strip cut across the fabric. The first strip of each size shows how the pieces line up.
Enter how many pieces you need to cut and their size. The calculator shows how many strips to cut, how much fabric to buy and whether fat quarters would do. Forty 5 inch squares from 42 inch quilting cotton take 5 strips, or ⅞ yard with 10 percent extra.
How to use the fabric yardage calculator
Enter how many pieces you need and their width and height. Tap "Add another size" for each different piece cut from the same fabric, up to six sizes.
Choose whether your sizes mean cut sizes (seam allowance included) or finished sizes.
Check the fabric width and the selvage trim. Quilting cotton is 42 to 44 inches wide; wide backing and some solids are wider.
Set the extra percentage, and tick "Directional print" if the pieces must all stay the same way up.
How the yardage is worked out
Quilters usually cut a strip across the full width of the fabric, then cut that strip into pieces. So the calculator first works out how many pieces fit side by side across the usable width. That tells it how many strips you need, and the strips stacked together give the length of fabric.
For rectangles, it also tries the pieces turned sideways. A 12½ by 6½ inch rectangle fits 3 across a 40 inch strip one way and 6 the other way, and the second layout can use less fabric. If your print has a direction, mark it and the calculator keeps every piece upright.
Strips = number of pieces ÷ pieces per strip, rounded up.
Fabric length = strips × piece height, added up for every size.
Yards to buy = fabric length × (1 + extra %) ÷ 36, rounded up to ⅛ yard.
Worked example: charm squares for a quilt top
A pattern needs forty 5 inch squares from one fabric. Trimming 2 inches of selvage from 42 inch fabric leaves 40 inches, and 40 ÷ 5 = 8 squares per strip. Forty squares ÷ 8 = 5 strips, each 5 inches wide, which is 25 inches of fabric.
Twenty-five inches is 0.69 yard, so a ¾ yard cut covers it with a little to spare. With 10 percent extra the total is 27.5 inches, or 0.76 yard, so the calculator suggests ⅞ yard. The same squares would also fit in 4 fat quarters, at 12 squares each.
Yardage for common square sizes
Cut sizes, from 42 inch fabric with 40 inches usable and no extra added. Add your safety margin on top.
Yards of fabric needed for 24, 48 and 100 squares of common cut sizes
Square
Per strip
24 squares
48 squares
100 squares
2½"
16
¼ yd
¼ yd
½ yd
3½"
11
⅜ yd
½ yd
1 yd
4½"
8
⅜ yd
¾ yd
1⅝ yd
5"
8
½ yd
⅞ yd
1⅞ yd
6½"
6
¾ yd
1½ yd
3⅛ yd
10"
4
1¾ yd
3⅜ yd
7 yd
How many squares from a yard of fabric
Turn the question around and the same strip method tells you what a yard holds. Pieces per strip times the whole strips in 36 inches gives the count. The 42" column uses 40 usable inches. The 60" column is for wider fabric, with the same 2 inch selvage trim. The last column is one fat quarter; our fat quarter size guide has more cuts and strip counts.
Squares of common cut sizes from one yard of 42 inch and 60 inch fabric and from one fat quarter
Square
Per strip
Strips per yard
Per yard, 42"
Per fat quarter
Per yard, 60"
2½"
16
14
224
56
322
3½"
11
10
110
30
160
4½"
8
8
64
16
96
5"
8
7
56
12
77
6½"
6
5
30
6
40
10"
4
3
12
2
15
The table counts 56 five inch squares and 224 squares at 2½ inches per yard of 42" cotton. Neither figure allows for shrinkage or straightening the cut edge, which is why the calculator adds 10 percent by default.
Precuts in yardage
Precut bundles hold a set number of pieces, so you can work out how much yardage would replace one. The counts below come from the Stitchin' Heaven precut chart. The yardage is the calculator's, from 42" fabric with nothing extra added.
Yardage of 42 inch fabric that gives the same pieces as common precuts
Precut
What is in it
Strips to cut
Same pieces from yardage
Charm pack
about 42 squares, 5"
6
⅞ yd
Layer cake
about 42 squares, 10"
11
3⅛ yd
Jelly roll
about 40 strips, 2½" wide
40
2⅞ yd
Yardage gives you one print, while a precut bundle gives you many coordinated prints. So this is about quantity: if a pattern asks for a charm pack and you want to use one fabric instead, buy at least that much.
Fabric width changes the count
Quilting cotton is sold 42 to 44 inches wide, and those two inches can matter. One hundred 4½ inch squares fit 8 to a strip from 42" fabric, so they need 13 strips and 1⅝ yards. From 44" fabric, 9 fit across, so 12 strips and 1½ yards do the job. Measure your fabric from selvage to selvage and type the real width into the calculator.
How many inches is 1/8 of a yard?
One eighth of a yard is 4½ inches (11.4 cm). A yard is exactly 36 inches, so a quarter yard is 9 inches, a half yard is 18 inches and three quarters is 27 inches. Shops cut fabric in these eighths, so the calculator rounds up to the next one.
Fabric is sold by the yard, and shops cut it in fractions of a yard. A cut is always the full width of the bolt, so a quarter yard of 42" cotton is a 9 by 42 inch piece.
Yard fractions converted to inches and centimeters
Yards
Inches
Centimeters
⅛ yd
4½"
11.4 cm
¼ yd
9"
22.9 cm
⅜ yd
13½"
34.3 cm
½ yd
18"
45.7 cm
⅝ yd
22½"
57.1 cm
¾ yd
27"
68.6 cm
⅞ yd
31½"
80.0 cm
1 yd
36"
91.4 cm
How do you measure a yard of fabric?
A yard of fabric is 36 inches (91.44 cm) measured along the selvage, the finished edge that runs down the length of the bolt. Lay the fabric flat, measure 36 inches along that edge, and cut straight across from one selvage to the other. The width is whatever the bolt is: 42 to 44 inches for quilting cotton, wider for backing fabric.
Tips for buying and cutting
Measure your fabric before cutting. Some bolts are wider than 42 inches, and an extra piece per strip can save a strip or two.
If you prewash, buy the extra. Cotton can shrink a few percent in length and width.
Cut the largest pieces first, then use leftover strip ends for smaller pieces of the same fabric.
Fat quarters suit small pieces and scrappy quilts. For strips longer than 21 inches, buy yardage.
Video tutorial
"How Much Fabric Do I Need to Buy For a Quilt Top" by Professor Pincushion, on YouTube. The video loads only when you press play.
Free to use on a blog, guild site or class page. Paste the code into an HTML block. Please keep the credit line under the calculator.
Assumptions and sources
What the calculator assumes
The calculator cuts pieces from strips across the width of fabric, the usual rotary cutting method. Each piece size gets its own strips. The calculator does not reuse leftovers at the end of a strip for a different size, so real cutting can come out slightly under the estimate.
Usable width is the fabric width minus the selvage trim, 2 inches by default.
The calculator turns pieces sideways when that fits more per strip and uses less fabric, unless you mark the print as directional.
Finished sizes get ½ inch added, a ¼ inch seam allowance on every side.
Yardage rounds up to the next ⅛ yard after the extra percentage goes on. Meters round up to the next 10 cm.
The calculator treats a fat quarter as 18 by 21 inches of usable fabric.
How much fabric do I need for 40 five inch squares?
From 42 inch quilting cotton with 2 inches trimmed for selvages, 8 squares fit across each strip, so 40 squares take 5 strips of 5 inches: 25 inches of fabric. That is ¾ yard exactly, or ⅞ yard with 10 percent extra.
Should I enter cut or finished sizes?
Either. Cut size is what you measure with your ruler, seam allowance included. Finished size is what shows in the quilt. If your pattern lists finished sizes, choose "Finished sizes" and the calculator adds ½ inch, which is a ¼ inch seam allowance on each side.
What is the usable width of quilting cotton?
Quilting cotton comes 42 to 44 inches wide. The selvages along each edge have a tighter weave and carry the maker's name, so quilters trim them off. The calculator takes 2 inches off by default, leaving 40 inches from 42 inch fabric. Measure your own fabric if you want to use every inch.
How many 2½ inch strips are in a yard of fabric?
A yard is 36 inches long, so it holds 14 strips 2½ inches wide (35 inches), with 1 inch left over. If the fabric needs straightening first, plan on 13.
How many strips can I cut from a length of fabric?
Put the fabric length and the strip width in the same unit, divide, and round down, because a part strip is too narrow to use. From 5¼ yards, strips ¾ yard long give 5.25 ÷ 0.75 = 7 strips. Twenty yards is 720 inches, so it gives 720 ÷ 6 = 120 strips 6 inches wide. In real cutting, straightening the cut end can cost one strip.
How many pieces can I cut from a fat quarter?
A fat quarter is about 18 by 22 inches, or 18 by 21 once you trim the selvage. That fits 12 five inch squares (4 across and 3 down) or 20 charm-size 4 inch squares. The calculator works this out for each piece size.
Why add extra fabric?
Cotton can shrink a few percent when washed, the cut end of the fabric from the store is rarely straight, and a mis-cut piece needs replacing. A 10 percent margin covers those for most projects; raise it if you plan to prewash or fussy cut.
How many 5 inch squares can I cut from a yard of fabric?
56 squares from 42 inch quilting cotton: 8 across each 5 inch strip and 7 whole strips in 36 inches. That is more than the 42 squares in a charm pack. At 2½ inches the same yard gives 224 squares.
How many inches are in an eighth of a yard?
An eighth of a yard is 4½ inches, a quarter is 9 inches, a half is 18 inches and three quarters is 27 inches. Shops usually cut fabric in eighths of a yard, so the calculator rounds up to the next eighth.